HomeMy WebLinkAboutBrugg Piping Spec. 7-5-16—� SECON@-X
Pipe system for petrol stations
|
Double walled flexible fill pipe for automotive fmNnin
petrol station constructions
System advantages
* flexible, double walled
* impo,maable and corrosion-resistant
° fast and simple to install
= environmentally safe
* the most cost effective metallic pip
General Description
SECON-XI has been specially developed aao coaxial pipe for under-
ground oemioe in petrol stations. Fast and easy installation Without
welding, early completion and minimal downtime un retrofits are only
some of the major advantages ofSECON-X`1.
Construction '
3ECON-V is a flexible
capable of being tested and even monitored for leaks. The SECON-XI
double walled pipe system consists of a helically corrugated stainless
steel primary pipe and a polyethylene secondary containment casing
pipe. Helical channels are formed by the geometry of the primary
pipe around the circumference, aided by longitudinal channels in the
secondary pipe, Both extend over the �ntire length of the pipe, These
longitudinal channels between the carrier and casing pipe provide
the necessary annular gap for the safe land contained flow of leaking
product along and within the coaxial pipe.
The stainless steel primary pipe of SEC�01\141�; is not only corrosion-
resistant but is also a permeation also capable of
handling the future generation utauto motive fuels. Being made of cor-
rosion pmufmoteha|nSECON-XI"doun hot need any additional cathodic
corrosion—protection, !
Fields of application
SECON4�pipm�ou�o�tocompUen w�hlocal and nodnna|�quim~
merits, are designed for use as:
° Suction pipes
° Pressure pipes
* Fill pipes
Sizes and Pressure ratings
Available sizes: ON (nom. bore) 40 (1112"), 50 (2") and 700 (4")
Max, operating pressure: + 10.0 bar (145 PS|G) or any pressure below
atmospheric pressure,
Connection method
A special graphite ring ia used ao seal between the corrugated
(phmoqA pipe and the connector.
The connector can be supplied with:
• Thread
• Split -flange
The seal between the secondary PE pipe and the connector ixachieved
by means ofmboot.
Installation
SECON-V can be delivered in coils oron cable reels. The nmruOmad
primary pipe gives this pipe extraordinary good bendobi|ity for ease of
installation. 3ECON-V91 can easily be cmto the required lengths on site
end — whomneoeanary — bentatverybghtradiiUn|ikewithn|astin
piping there ia virtually no spring back once bent. A feature that makes
the contractors job a lot easier and quicker, Lost not least it saves
money,
BRUGG PIPESYSlrEMS
Flexible solutions