Loading...
HomeMy WebLinkAboutFMC 2016MONITORING SYSTEM CERTIFICATION For Use By All Jurisdictions Within the State of California Authority Cited: Chapter 6.7, Health and Safety Code; Chapter 16, Division 3, Title 23, California Code of Regulations This form must be used to document testing and servicing of monitoring equipment.A separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work.A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A.General Information Facility Name: ______Sprint Bakersfield________________________________ Bldg. No.:____________ Site Address: __________715 E. Sumner City: _Bakersfield____________ Zip: 93385 Facility Contact Person: Doye ______________________________________ Contact Phone No.: (_217_)__663-9440________ Make/Model of Monitoring System: __Veeder-Root TLS 350 Date of Testing/Servicing:_10 / 10 /16 B.Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced: Tank ID: __Diesel 550 gal_______________________ In-Tank Gauging Probe.Model:847390-101 Annular Space or Vault Sensor.Model: 794390- 409________ Piping Sump / Trench Sensor(s).Model: 794380-208_________ Fill Sump Sensor(s).Model: Mechanical Line Leak Detector.Model: ____________________ Electronic Line Leak Detector.Model: ____________________ Tank Overfill / High-Level Sensor.Model:flapper/ VR ext Alarm Other (specify equipment type and model in Section E on Page 2). Tank ID: ____________________________________________ In-Tank Gauging Probe.Model: ____________________ Annular Space or Vault Sensor.Model: ____________________ Piping Sump / Trench Sensor(s).Model: ____________________ Fill Sump Sensor(s).Model: ____________________ Mechanical Line Leak Detector.Model: ____________________ Electronic Line Leak Detector.Model: ____________________ Tank Overfill / High-Level Sensor.Model: ____________________ Other (specify equipment type and model in Section E on Page 2). Tank ID: ____________________________________________ In-Tank Gauging Probe.Model: ____________________ Annular Space or Vault Sensor.Model: ____________________ Piping Sump / Trench Sensor(s).Model: ____________________ Fill Sump Sensor(s).Model: ____________________ Mechanical Line Leak Detector.Model: ____________________ Electronic Line Leak Detector.Model: ____________________ Tank Overfill / High-Level Sensor.Model: ____________________ Other (specify equipment type and model in Section E on Page 2). Tank ID: ____________________________________________ In-Tank Gauging Probe.Model: ____________________ Annular Space or Vault Sensor.Model: ____________________ Piping Sump / Trench Sensor(s).Model: ____________________ Fill Sump Sensor(s).Model: ____________________ Mechanical Line Leak Detector.Model: ____________________ Electronic Line Leak Detector.Model: ____________________ Tank Overfill / High-Level Sensor.Model: ____________________ Other (specify equipment type and model in Section E on Page 2). Dispenser ID: ________________________________________ Dispenser Containment Sensor(s).Model: ____________________ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: ________________________________________ Dispenser Containment Sensor(s).Model: ____________________ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: ________________________________________ Dispenser Containment Sensor(s).Model: ____________________ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: ________________________________________ Dispenser Containment Sensor(s).Model: ____________________ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: ________________________________________ Dispenser Containment Sensor(s).Model: ____________________ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: ________________________________________ Dispenser Containment Sensor(s).Model: ____________________ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). *If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C.Certification - I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers’ guidelines. Attached to this Certification is information (e.g. manufacturers' checklists) necessary to verify that this information is correct and a Plot Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the report; (check all that apply): System set-up  Alarm history report Technician Name (print): _Peter Jauregui III_________________Signature: __________________________________________ Certification No.: _B34641________________________________License. No.: _______708231___________________________ Testing Company Name: _Jauregui &Culver inc___________________________ Phone No.:(__760__)__734-0518 _________ Site Address: 959 W. Mission Ave Escondido CA 92025 _________________________ Date of Testing/Servicing: _10_/ 10 / 2016 Page 1 of 3 03/01 Monitoring System Certification D.Results of Testing/Servicing Software Version Installed: _______17.01 ___________________________ Complete the following checklist: Yes No*Is the audible alarm operational? Yes No*Is the visual alarm operational? Yes No*Were all sensors visually inspected, functionally tested, and confirmed operational? Yes No*Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? Yes No* N/A If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) operational? Yes No* N/A For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes:which sensors initiate positive shut-down?(Check all that apply) Sump/Trench Sensors; Dispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor failure/disconnection? Yes; No. Yes No* N/A For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank fill point(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? _90_% Yes*No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E, below. Yes*No Was liquid found inside any secondary containment systems designed as dry systems?(Check all that apply) Product; Water. If yes, describe causes in Section E, below. Yes No*Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if applicable Yes No*Is all monitoring equipment operational per manufacturer’s specifications? * In Section E below, describe how and when these deficiencies were or will be corrected. E.Comments:___________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ Page 2 of 3 03/01 F.In-Tank Gauging / SIR Equipment:Check this box if tank gauging is used only for inventory control. Check this box if no tank gauging or SIR equipment is installed. This section must be completed if in-tank gauging equipment is used to perform leak detection monitoring. Complete the following checklist: Yes No*Has all input wiring been inspected for proper entry and termination, including testing for ground faults? Yes No*Were all tank gauging probes visually inspected for damage and residue buildup? Yes No*Was accuracy of system product level readings tested? Yes No*Was accuracy of system water level readings tested? Yes No*Were all probes reinstalled properly? Yes No*Were all items on the equipment manufacturer’s maintenance checklist completed? * In the Section H, below, describe how and when these deficiencies were or will be corrected. G.Line Leak Detectors (LLD):Check this box if LLDs are not installed. Complete the following checklist: Yes No* N/A For equipment start-up or annual equipment certification, was a leak simulated to verify LLD performance? (Check all that apply) Simulated leak rate: 3 g.p.h.; 0.1 g.p.h ; 0.2 g.p.h. Yes No*Were all LLDs confirmed operational and accurate within regulatory requirements? Yes No*Was the testing apparatus properly calibrated? Yes No* N/A For mechanical LLDs, does the LLD restrict product flow if it detects a leak? Yes No* N/A For electronic LLDs, does the turbine automatically shut off if the LLD detects a leak? Yes No* N/A For electronic LLDs, does the turbine automatically shut off if any portion of the monitoring system is disabled or disconnected? Yes No* N/A For electronic LLDs, does the turbine automatically shut off if any portion of the monitoring system malfunctions or fails a test? Yes No* N/A For electronic LLDs, have all accessible wiring connections been visually inspected? Yes No*Were all items on the equipment manufacturer’s maintenance checklist completed? * In the Section H, below, describe how and when these deficiencies were or will be corrected. H.Comments:___________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ Page 3 of 3 03/01 UNDERGROUND STORAGE TANK MONITO�G SYSTEM CERTIFICATION Site Address: 715 E. SUMNER Fill/Piping Sump wltank probe Aunular 0 UST Monitoring Site Plan City: BAKERSFIELD TI.8350 Generator Room Overl!R Alarm DIESEL Fiberglass Tonk SSOGal Main Building Permit Numbor: Zip: 9338S- Date map was drawn: 2015 IoMmctions If you already have a diagram that shows all required information, you may include it, rather than this page, with your Monitoring System Certification. On your site plan, show the general layout of tanks and piping. Clearly identify locations of the following equipment, if installed: monitoring •�tern control panels; sensors monitoring tank annular spaees, sumps, dispenser pallll, spill containers, or other secondary conlainment areas; mechanical or electronic line leak detectors; and in­tank liquid level probes (if used for leak detection). In the apace provided, note tho date this Site Plan was prepared. 4 409 208 101 SWRCB, January 2006 Spill Bucket Testing Report Form This form is intended for use by contractors performing annual testing of UST spill containment structures. The completed form and printouts from tests (if applicable), should be provided to the facility owner/operator for submittal to the local regulatory agency. 1.FACILITY INFORMATION Facility Name:Sprint Bakersfield Date of Testing:10/10/2016 Facility Address:715 E. Sumner, Bakersfield, Ca 93385 Facility Contact:Doye Phone:217-663-9440 Date Local Agency Was Notified of Testing : Name of Local Agency Inspector (if present during testing):Shain 2.TESTING CONTRACTOR INFORMATION Company Name:Jauregui & Culver inc Technician Conducting Test:Peter Jauregui III Credentials1:x CSLB Contractor x ICC Service Tech. SWRCB Tank Tester  Other (Specify) __________________ License Number(s):708231,8195227 3.SPILL BUCKET TESTING INFORMATION Test Method Used:x Hydrostatic  Vacuum  Other (Specify)____________________________Test Equipment Used: Water and Tape Measure Equipment Resolution: 0 Loss Identify Spill Bucket (By Tank Number, Stored Product, etc.) Diesel 2 3 4 Bucket Installation Type: Direct Bury X Contained in Sump  Direct Bury  Contained in Sump  Direct Bury  Contained in Sump  Direct Bury  Contained in Sump Bucket Diameter:12” Bucket Depth:13” Wait time between applying vacuum/water and start of test:20 min Test Start Time (TI):10:30 Initial Reading (RI):8 1/4 ” Test End Time (TF):11:30 Final Reading (RF):8 1/4” Test Duration (TF – TI):1 hr Change in Reading (RF -RI):0 change Pass/Fail Threshold or Criteria:0 loss Test Result:X Pass  Fail Pass  Fail Pass  Fail Pass  Fail Comments –(include information on repairs made prior to testing, and recommended follow-up for failed tests) Test water was deemed non hazardous and removed from site for future testing. CERTIFICATION OF TECHNICIAN RESPONSIBLE FOR CONDUCTING THIS TESTING I hereby certify that all the information contained in this report is true, accurate, and in full compliance with legal requirements. Technician’s Signature:________________________________________________Date:__10-10-16 1 State laws and regulations do not currently require testing to be performed by a qualified contractor. However, local requirements may be more stringent.