HomeMy WebLinkAbout2010 FMC RESULTS MONITORING SYSTEM CERTIFICATION 11111111111111111111 07
For Use By All Jurisdictions Within the State of California IE
Authority Cited: Chapter 6 7, Health and Safety Code; Chapter 16,Division 3, Title 23, California Code of Regulations
This form must be used to document testing and servicing of monitoring equipment. A separate certification or report must be prepared for each
monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator.
The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date.
A. General Information
Facility Name: Sam's Liquor and Gas Bldg. No.:
Site Address: 801 East California Avenue City: Bakersfield Zip: 93307
Facility Contact Person: Sam Contact Phone No.: (661) 562.965.0724
Make/Model of Monitoring System: Incon TS1000 Date of Testing/Servicing: 12/30/2010
B. Inventory of Equipment Tested/Certified
Check the appropriate boxes to indicates chic e ui ment ins cted/serviced:
Tank ID: 87 Unleaded Tank ID: 91 Unleaded
®In-Tank Gauging Probe. Model: TSP-LL2-125 ®In-Tank Gauging Probe. Model: _TSP-LL2-125
®Annular Space or Vault Sensor. Model: ULS ®Annular Space or Vault Sensor. Model: ULS
®Piping Sump/Trench Sensor(s). Model: ULS ®Piping Sump/Trench Sensor(s). Model: ULS
❑Fill Sump Sensor(s). Model: ❑Fill Sump Sensor(s). Model:
®Mechanical Line Leak Detector. Model: RJFX1 V ®Mechanical Line Leak Detector. Model: RJFX1 V
❑Electronic Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model:
®Tank Overfill/High-Level Sensor. Model: Flapper ®Tank Overfill/High-Level Sensor. Model: Flapper
❑Other(spe(:ify equipment type and model in Section E on Page 2). ❑Other(specify equipment type and model in Section E on Page 2).
Tank ID: Diesel Tank ID:
®In-Tank Gau,inp Probe. Model: TSP-LL2-??? ❑In-Tank Gauging Probe. Model'
®Annular Space or Vault Sensor. Model: ULS ❑Annular Space or Vault Sensor. Model:
®Piping Sump/Trench Sensor(s). Model: ULS ❑Piping Sump/Trench Sensor(s). Model:
❑Fill Sump Sensor(s). Model: ❑Fill Sump Sensor(s). Model:
®Mechanical Line Leak Detector. Model: RJFX1 DV ❑Mechanical Line Leak Detector. Model:
❑Electronic Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model:
®Tank Overfill/High-Level Sensor. Model: Flapper ❑Tank Overfill/High-Level Sensor. Model:
❑Other(specify equipment type and model in Section E on Page 2). ❑Other(specify equipment type and model in Section E on Page 2).
Dispenser 10: 1/2 Dispenser ID: 3/4
®Dispenser Containment Sensor(s). Model: ULS ®Dispenser Containment Sensor(s). Model: ULS
®Shear Valve(s). N Shear Valve(s).
❑Dispenser Containment Roat(s)and Chain(s). ❑Dispenser Containment Float(s)and Chain(s).
Dispenser ID: 5/6 Dispenser ID: 7/8
®Dispenser Containment Sensor(s). Model: ULS ®Dispenser Containment Sensor(s). Model: ULS
®Shear Valve(s). ®Shear Valve(s).
❑Dispenser Containment IZoat(s)and Chain(s). ❑Dispenser Containment float(s)and Chain(s).
Dispenser lD: Dispenser ID:
❑Dispenser Containment Sensor(s). Model: ❑Dispenser Containment Sensor(s). Model:
❑Shear Valve(s). ❑Shear Valve(s).
❑Dispenser Containment Float(s)and Chain(s). ❑Dispenser Containment Float(S)and Chain(s).
-�If the facility contains more tanks or dispensers,copy this form. Include information for every tank and dispenser at the facility.
C. Certification -I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers'
guidelines. Attached to this Certification is information (e.g. manufacturers' checklists) necessary to verify that this information is
correct and a Plot Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports,I have also
attached a copy of the report;(check all that apply): ®System set-up ®Alarm history report
Technician Name(print): Jerry Rangel Signature: .
Certification No.: ICC: 5309489-UT,Veeder Root: B35460 License.No.: 532878 A, Haz
Testing Company Name: Redwine Testing Services, Inc. Phone No.: (661) 834-6993
Site Address: P.O. Box 1567, Bakersfield, CA.93309 Date of Testing/Servicing: 12/30/2010
Page 1 of 3
UN-036—1/4 www.unidoes.org IIIIIIIIVIIIIIIIIII 08 Rev.01126106
IE
Monitoring System Certification
A Results of Testing/Servicing
Software Version Installed:
Complete the following checklist:
® Yes ❑ No* Is the audible alarm operational?
• Yes ❑ No* Is the visual alarm operational?
• Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational?
® Yes ❑ Nor Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will
not interfere with their proper operation?
❑ Yes ❑ No's If alarms are relayed to a remote monitoring station, is all communications equipment (e.g., modem)
® N/A operational?
® Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment
❑ N/A monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate
positive shut-down? (Check all that tipple) ® Sump/Trench Sensors; ®Dispenser Containment Sensors.
Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ®Yes; ❑No.
❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e., no
® N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank
fill point(s)and operating properly? If so,at what percent of tank capacity does the alarm trigger? %
❑ Yes* ® No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced
and list the manufacturer name and model for all replacement parts in Section E,below.
❑ Yes= ® No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)
❑ Product; ❑ Water. If yes,describe causes in Section E,below.
® Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports, if applicable
® Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications?
In Section E below,describe how and when these deficiencies were or will be corrected.
E. Comments:
Page 2 of 3
UN-036—2/4 www.unidocs.org Rev.OIJ26 106
Monitoring System Certification
F. In-Tank Gauging/SIR Equipment: ® Check this box if tank gauging is used only for inventory control.
❑ Check this box if no tank gauging or SIR equipment is installed.
This section must be completed if in-tank gauging equipment is used to perform leak detection monitoring.
Complete the following checklist:
® Yes ❑ No* Has all input wiring been inspected for proper entry and termination,including testing for ground faults?
• Yes ❑ No* Were all tank gauging probes visually inspected for damage and residue buildup?
• Yes ❑ No* Was accuracy of system product level readings tested?
® Yes ❑ No* Was accuracy of system water level readings tested?
• Yes ❑ No* Were all probes reinstalled properly?
• Yes ❑ No* Were all items on the equipment manufacturer's maintenance checklist completed.)
In the Section H,below,describe how and when these deficiencies were or will be corrected.
G. Line Leak Detectors (LLD): ❑ Check this box if LLDs are not installed.
Complete the following checklist:
® Yes ❑ No* For equipment start-up or annual equipment certification, was a leak simulated to verify LLD performance?
❑ N/A (Check all that apply) Simulated leak rate: ®3 g.p.h.; ❑0.1 g.p.h; ❑0.2 g.p.h.
• Yes ❑ No* Were all LLDs confirmed operational and accurate within regulatory requirements?
• Yes ❑ No* Was the testing apparatus properly calibrated?
• Yes ❑ No* For mechanical LLDs,does the LLD restrict product flow if it detects a leak?
❑ N/A
❑ Yes ❑ No* For electronic LLDs,does the turbine automatically shut off if the LLD detects a leak?
0 N/A
❑ Yes ❑ No* For electronic LLDs, does the turbine automatically shut off if any portion of the monitoring system is disabled
® N/A or disconnected?
❑ Yes ❑ No* For electronic LLDs, does the turbine automatically shut off if any portion of the monitoring system malfunctions
® N/A or fails a test?
❑ Yes ❑ No* For electronic LLDs,have all accessible wiring connections been visually inspected?
® N/A
® Yes ❑ No* Were all items on the equipment manufacturer's maintenance checklist completed?
In the Section H,below,describe how and when these deficiencies were or will be corrected.
H. Comments:
Page 3 of 3
UN-036—1/4 www.unidocs.org Rev.01/26/06
MECHANICAL LEAK DETECTOR TEST
WORK SHEET
W /O # : 2955
Facility Name: Sam's Liquor and Gas
Facility Address: 801 East California Avenue, Bakersfield, CA. 93307
Product Line Type (Pressure, Suction, Gravity) Pressure
PRODUCT LEAK DETECTOR TYPE TEST TRIP PASS
SERIAL# BELOW PSI OR
3 GPM FAIL
L/D TYPE RJFX1 DV
Diesel SERIAL# Yes 10 psi Pass
L/D TYPE RJFX1 V
91 SERIAL # Yes 9 psi Pass
L/D TYPE RJFX1 V
87 SERIAL # Yes 9 psi Pass
L/D TYPE
SERIAL#
I certify the above tests were conducted on this date according to Red Jacket Pumps
field test apparatus testing procedure an limitations
The Mechanical Leak Detector Test pass / fail is determined by using a low flow
threshold trip rate of 3 gallon per hour or les at 10 PSI
I acknowledge that all data collected is true and correct to the best of my knowledge.
Tech: Jerry Rangel
Signature: —� Date: 12/30/2010
SWRCB,January 2006
Spill Bucket 'Testing Report Form
This form is intended for use by contractors performing annual testing of UST spill containment structures. The completed form anti,
printouts from tests(if applicable), should be provided to the facility owner/operator for submittal to the local regulatory agency.
1. FACILITY INFORMATION
Facility Name: Sam's Liquor and Gas Date of Testing: 12/30/10
Facility Address: 801 East California Avenue,Bakersfield,CA.93307
Facility Contact: Sam I Phone: 562.965.0724
Date Local Agency Was Notified of Testing: 12/16/10
Name of Local Agency Inspector(if present during testing): None present
2. TESTING CONTRACTOR INFORMATION
Company Name: Redwine Testing Services Inc.
Technician Conducting Test: Jerry Rangel
Credentials': CSLB Contractor X ICC Service Tech. SWRCB Tank Tester Other(Specify)
License Number(s): ICC: 5309489-UT,Incon: 3654733761
3. SPILL BUCKET TESTING INFORMATION
Test Method Used: X Hydrostatic Vacuum Other
Test Equipment Used: INCON TS-STS Equipment Resolution: .0000 inches
tz�Y!Y.].Wa:.�ah?:aG'C} Y.;+C:,£ `�C.vY.STTX��'.Y .Sfs,'YPwF:R0.a":X.�Ir:=�_:'".�1G.'4 _4?iJS'.5f�':':SS'�'Zia0.:H[�53hLS..NctK.Yes ,�K4�m^!r2Ya.'h1Mis4bTVN..A:4.nsiC.f.,✓�tiKtt
Identify Spill Bucket(By Tank 1 Diesel fill 2 91 fill 3 87 fill 4
Number, Stored Product, etc.)
Bucket Installation Type: X Direct Bury X Direct Bury X Direct Bury Direct Bury
Contained in Sump Contained in Sump Contained in Sump Contained in Sum
Bucket Diameter: 11" 11" 11"
Bucket Depth: 16" 151/2" 15"
Wait time between applying 30 minutes 30 minutes 30 minutes
vacuum/water and start of test:
Test Start Time(Tj): 8:06 am/8:22 am 8:06 am/8:22 am 8:06 am/8:22 am
Initial Reading(Rj): 6.9721 /6.9714 6.5345/6.5351 7.5443/7.5540
Test End Time(TF): 8:21 am/8:37 am 8:21 am/8:37 am 8:21 am/8:37 am
Final Reading(Rj): 6.9718/6.9713 6.5360/6.5350 7.5442/7.5541
Test Duration(T,:—Tj): 15 minutes 15 minutes 15 minutes
Change in Reading(R,:-R1): .0003/.0001 .0015/.0001 .0001 /.0001
Pass/Fail Threshold or -.002" -.002" -.002"
Criteria:
Test Result{ _ F x X Pass' F ail F7 YP,ass ;Fail X Pass :s, Fail` Pass z Fail
Comments—(include information on repairs made prior to testing, and recommended follow-up for_liiiled tests)
CERTIFICATION OF TECHNICIAN RESPONSIBLE FOR CONDUCTING THIS TESTING
I hereby certify that all the information contained in this report is true,accurate,and in full compliance with legal requirements.
Technician's Signature: Date:_12/30/10
' State laws and regulations do not currently require testing to be performed by a qualified contractor. However,local requirements
may be more stringent.
' TANKS
NUMBER OP TANKS 3
TANK 1
w*nE DIESEL
TANK SHAPE HORIZONTAL
SHMS GAS LIQUOR TANK TYPE SPECIAL 1
SAMS GAS LIQUOR 801 E CALIF AVE PROBE PROBE 1
BHKERSFIELD CH 93307 PRODUCT PRODUCT 1
661-861-1614 MANIFOLD NON[
BAKERSFIELD CA 93307 PROD OFFSET 1.000
WATER OFFSET -1.000
12/30/2080 7:22 HM DEL THRESHOLD 200
HIGH HIGH LIM 95.000
SYSTEM SETUP REPORT HIGH HIGH O/G NONE
HIGH LIMIT 90.000
TANK TNVFNTORY DETAIL SYSTEM INpO HI.GH LIMIT O/G NONE
LOW LIMIT 1200.0
DIESEL SOFTWARE LOW LIMIT O/0 NONE
PART 71P/4 LOW LOW LIMIT 500.0
TANK NO. 1 1-2064.7 GAL VERSION 5.000 LOW LOW 0/6 NONE
PRODU(�T DIESEL RELEASED 87/85/2006 WATER LIMIT 3,000
GFRIOSS 22121.4 GAL . WATER O/G NONE
SYSTEM ID SEE ABOVE TANK 2
PROD LEUEL —6.5�6 IN HAM[ PREMIUM
MEASUREMENT UNITS TANK SHAPE HORIZONTAL
I-ILLA.GE 9'240.1 GAL CORRECTION TEMP 60.0 TANK TYPE SPECIAL 1
TEMPERATURE 70.07'7 F 1-11-AGE PERCENT 95 PROBE PROBE 2
WATER LEVEL 0.01-30 IN VOLUME GALLONS PRODUCT PRODUCT 2
WATER VOLUME 0.0 GAL !-EVEL INCHES MANIFOLD NONE
TEMPERATURE FAHRENHEIT PROD OFFSET 3.500
PRESSURE PSI WATER OFFSET -1,080
PREMIUM DEL THRESHOLD 200
CLOCK/CALENDAR HIGH HIGH LIM 95.000
TANK HO. 2' 12-1064.7 GAL TIME STYLE 12 HOUR HIGH HIGH O/G NON[
PRODUCT PROD 91 -
DATE STYLE MM/D0/YY HIGH LIMIT 90.000
�JET 3168.7 GAL DAYLIGHT SH» ENABLED HIGH LIMIT O/G NON[
PROD LEUEL 34.412 IN SET TIME 7:22 HM LOW LIMIT 1200.0
GROSS CAPACITY 26.4X SET DATE 12/38/2088 LOW LIMIT 0/G NONE
LOW LOW LIMIT 500.0
SENTINEL MODE LOW LOW 0/G NONE
TEMPERATURE 66.646 F MODE SCHEDULED WATER LIMIT 4.000
WATFR LEVEL 0.000 lN START TIME 1:00 AM WATER O/G NONE
WATER VOLUME 0.0 GAL END TIME 3:00 HM TANK 3
NOME UNL
REPORT PRINT ENABLES TANK SHAPE HORIZONTAL
UNL D[LTVERIES ENABLED TANK TYPE SPECIAL 1
ALARMS ENABLED PROBE PROBE 3
LEAK TESTS ENABLED PRODUCT PRODUCT 3
PRODUrT MANIFOLD NUN[
GROSS 5979.0 GAL LIMITS PROD OFFSET 2.5g0
NET 5940,2 GAL LEAK LIMIT 2,00 WATER OFFSET -1.000
PROD LEVEL 55.114 IN LEHK LIMlT O/G NONE DEL THRESHOLD 200
GROSS CAPACITY 49.6'e' THEFT LIMIT 50,00 HIGH HIGH LIM 95.000
ULLAGE 5482.5 GAL THEFT LIMIT O/G NONE HIGH HIGH 0/0 NONE
TEMPERATURE 5, F HIGH LIMIT 90.000
WATER LEUEL 0.000 IN MISCELLANEOUS HIGH LIMIT O/G NONE
WATER. VOLUME 0.0 GAL SYSTEM FAIL ALL GROUPS LOW LIMIT 1200.0
DELIVERY DELAY 15 LOW LIMIT O/G NONE
HISTORY LENGTH 50 LOW LOW LIMIT 500.0
PRINT INTERVAL 1 LOW LOW 0/G NON[
BUSY pO NO WATER LIMIT 4.000
USER THRESHOLD 0 WATER O/G NONE
'
gPECIAL TANKS
COMM PORTS,
DIAMETER, 111.000
LENr,TH 288.00vr COMM PORT 1
CORRECTION PTS. O MODE NATIVE
BAUD 9600 BAUD
PROSES DATA BITS 8 BITS
STOP BITS 1 STOP BIT
PROBE 1 PARITY NO PARITY SENSORS
TYPE STD 125 SECURITY
GRADIENT 9108724 COMM PORT 2 NUMBER OF SENSORS, 12
RATIO 1:1 TIP TO HEAD MODE NATIVE
FLOATS 2 FLOATS BALD 9600 BAUD SENSOR 1 STD
FLOAT TYPE OIL DATA BITS 8 BITS RELAY NO RELAY
PROBE STOP BITS 1 STOP BIT NAME DIESEL STP
TYPE STD 125 PARITY NO PARITY STD 0:G GROUP A
GRADIENT 9.08348 SECURITY SENSOR ? STD
RATIO 1.:1. TIP TO HEAD ACCESS 1 RELAY NO RELAY
FLOATS 2 FLOATS PHONE I NAME 91 STP
FLOAT TYPE GASOLINE REDIAL 1 DISABLED STD O/G GROUP B
PROBE 3 ACCESS 2 SENSOR 3 STD
TYPE STD 125 PHONE 2 RELAY NO RELAY
GRADIENT 8.99232 REDIAL 2 DISABLED NAME 87 STP
RATIO 1:1 TIP TO HEAD ACCESS 3 STD O/G GROUP C
FLOATS 2 FLOATS PHONE 3 SENSOR 4 STD
FLOAT TYPE GASOLINE REDIAL 3 DISABLED RELAY NO RELAY
ACCESS 4 NAME SENSOR 4
PRODUCTS PHONE 4 STD 0/0 NONE
REDIAL 4 DISABLED SENSOR 5 STD
PRODUCT 1 DIAL DELIV RELAY NO RELAY
NAME DIESEL DIAL ALARM NAME DIESEL ANN
TYPE DIESEL DIAL LEAK STD O/G- GROUP E
PRODUCT 2 SENSOR 6 STD
NAME PROD 91 LEAK TESTS RELAY NO RELAY
TYPE UNLEADED SUP NAME 37 ANN
PRODUCT ' CONFIDENCE 95.0X STD 0/0 GROUP E
NAME 87 MIN TEST TIME
SENSOR 7 STD
TYPE UNLEADED REG MAX TEST TIME 4 KEG_AY NO RELAY
LEAK TEST NAME 91 ANN
REPORT SCHEDULES TANK 1 0.20 STD O/G GROUP E
TANK ' 0.20 SENSOR 8 STD
INVENTORY TANK 3 0.20 RELAY NO RELAY
PRODUCT DETAIL TEST SCHEDULE=: NAME SENSOR 3
SCHEDULE NONE TANK 1 STD O/G NONE
PRODUCT SUMMARY SCHEDULE 28TH DAY SENSOR 9 STD
SCHEDULE NONE TIME 1:00 AM RELAY RELAY 1
PRODUCT USAGE DETAIL TANK 2 NAME DISP 1-2
SCHEDULE NONE SCHEDULE 28TH DAY '=TD 0/G GROUP D
PRODUCT USAGE SUMMARY TIME 1:00 AM SENSOR 10 STD
SCHEDULE NONE TANK 3 RELAY NO RELAY
TANK DETAIL SCHEDULE 28TH DAY NAME DISP 3-4
SCHEDULE SHIFT TIME 1:00 AM STD O/G CROUP D
TIME 1 5:00 AM ALARM ON TEST FAIL NO SENSOR 11 STD
TIME S 12:00 AM RELAY NO RELAY
TIME 3 12:00 AM ANNUNCIATORS NAME DISP 5-6
SEND TO FAX NO STD C r/G GROUP D
SEND TO PRINTER YES MODULATED ANNUNCIATOR SENSOR 1^c STD
TANK SUMMARY TIMEOUT 0 RELAY NO RELAY
SCHEDULE NONE OUTPUT GROUPS NAME DISP 7-8
RECONCILIATION A-P YYYYY-------- STD 0-/0 GROUP D
SCHEDULE NONE Q-FP ----------------
DELIVERY SOLID ANNUNCIATOR TPI
PRODUCT DETAIL TIMEOUT 0 ENABLE[:, NO
SCHEDULE NONE OUTPUT GROUPS ADDRESS 80
PRODUCT SUMMARY A-P ----------------
SCHEDULE NONE Q-FF -------------- CATHODIC_. PROTECTION
DELIVERY HISTORY
SCHEDULE NONE RELAYS ENABLED NO
ALARMS ADDRES., 11
At:TIVE ALARMS RELAY 1 CURRENT LIMIT 10.0
SCHEDULE NONE TIMEOUT CURRENT OG NONE
CLEARED ALARMS OUTPUT GROUPS
SCHEDULE NONE A-P ----------------
ALARM HISTORY n-FF -------------
SCHEDULE NONE RELAY 2
SENSOR STATUS; TIMEOUT 15
SCHEDULE NONE OUTPUT GROUPS
REGULATORY A-P ----------
SCHEDULE NONE Q-FF ----------------
AUXILIARY INPUTS
INPUT 1
ACTIVE CLOSED
NAME AUXILIARY I
AUK INPUT OfG NONE
INPUT
ACTIVE CLOSED
NAME AUXILIARY
AUK INPUT O/G NONE
TS-ROM
GRACE PERIOD 0
CHANNFL I
OUTPUT GROUPS
A-P --YY------------
Q-FF -------------
r:HANNEI..
OUTPUT GROUPS
A-P -YyY------------
Q-FF -------------
CHANNEL .'
OUTPUT GROUPS
A-P Y--Y------------
Q-FF -------------
CHANNEL 4
OUTPUT GROUPS
A-P ----------------
Q-FF -------------
CHANNEL
OUTPUT GROUPS
A-P ----------------
Q-FF -------------
CHANNEL 6
OUTPUT GROUPS
A-P ----------------
Q-FF ---------- --
CHANNEi_. 7
OUTPUT GROUP
A-P ----------------
Q-FF ------------
CHANNEL
OUTPUT GROUPS
A-P ---------------
Q-FF ------------
I
d&� �{
std �•. y����y��
>lo.
zf-
_ r' F5,
KI y d f �t� �, C�=�iS CU�•
a
� c5y Fi pd �',b fr
:pyyts
Yb •b d �� ��t5y ay C•�dp���'v�, �`'
a a ts-.
S• cSy f�,��' �� u�
� u
� y��yO fi. byty,�y 6
�t?.a• �� �CSy fr, E,��4pd�r.day ,1����vt.
+lvuy
Fi b
SAMS GAS SAMS GAS
801 E CALIF. AVE 801 E CALIF. AVE
BAKERSFIELD BAKERSFIELD
CALIFORNIA CALIFORNIA
REDWINE TESTING SERVICES REDWINE TESTING SERVICES
12'30/2010 8:21 AM
12f30/2019 8:38 APT
SUMP LEAK TEST REPORT SUMP LEAK TEST REPORT
DSLFILL DSLFILL
TEST STARTED 8:06 AM - --
TEST STARTED 12/30/2010 TEST STARTED :_:/ AM
BEGIN LEVEL 5.9721 IN TEST STARTED 12i.'3a!2010
BEGIN LEVEL 6.9714 IN
END TIME 8:21 AM END TIME
END DATE 12`30}2010 8• �7 AM
LEVEL 6.9718 IN END DATE 12.'30�201E�
LEAK THRESHOLD 0.002 IN END LEVEL 6.9713 IN
LEAF, THRESHOLD 0.002 IN
TEST RESULT PASSED TEST RESULT PASSED
91 FILL 91 FILL
TEST STARTED 8:06 AM
TEST STARTED 12{30/2010 TEST STARTED 5:_�- AM
�
BEGIN LEVEL 6.5345 IN N TEST STARTED 12/30/2010 a
END TIME 5:21 BEGIN LEVEL 6.5351 IN
END DATE 12/30/2010
END TIME 8:37 AM
END LEVEL 6.5360 IN END GATE 12/30/2010
LEAK THRESHOLD 0.002 IN END LEVEL 6.5350 IN
LEAK THRESHOLD 0.002 IN
TEST RESULT PASSED TEST RESULT PASSED
87 FILL 57 FILL
TEST STARTED 8:06 Ah1
TEST STARTED 1" /30.12010 TEST STARTED 8:22 AM
BEGIN LEVEL 7.54#3 IN TEST STARTED 12.'30.•2010
END TIME 5:21 AM BEGIN LEVEL 7.5540 IN
END DATE 12/30/2010 END TIME 8:37 AM
END DATE 12/30/2010
END LEVEL 7.5442 IN .541 I
END LEVEL N
7.55
LEAK THRESHOLD 0.002 IN
TEST RESULT PASSED LEAF: THRESHOLD 0.002 IN
TEST RESULT PASSED